NS0-593 Online Practice Questions and Answers

A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1. You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.

What is the cause of the customer's problem?

A. The cable is plugged in upside down.

B. The incorrect cable is used.

C. The ports are configured for 4x10Gbit instead of 40Gbit.

D. The port has an incorrect SFP inserted.

You have a new VMware vSphere cluster with ESXI 7.0U2 hosts. The hosts are connected to a 4-node AFF A400 NetApp ONTAP9.8 cluster with FC LUNs. You have a requirement to identify and follow I/Os from each VM on the shared FC LUN-backed datastores for troubleshooting purposes.

In this scenario, which VMware feature Is supported by ONTAP software to accomplish this task?

A. Network I/O Control (NIOC)

B. Virtual machine ID (VMID)

C. Storage I/O Control (SIOC)

D. vSphere Cluster Services (vCLS)

You receive the "Unable to connect to the management gateway server"error when trying to connect to a node management IP.

In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

A. Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.

B. Log in to the service processor and collect the core dumps from the service processor.

C. Log in to the clustershell using the node console and collect the core dumps from the clustershell.

D. Log in to the systemshell and collect core dumps from thesystemshell.

Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS(DDNS) capability available in NetApp ONTAP to easily advertise both data UFs to their clients. Currently. DNS is only responding with one data LIF. DDNS is enabled on the domain controllers.

Referring to the exhibit, which two actions should be performed to enable DDNS updates to work? (Choose two.)

A. Disable the -vserver-fqdn parameter for the SVM DDNS services.

B. Remove the NFS protocol from the cifs_01 data LIF.

C. Enable the -use-secure parameter for the SVM DDNS services.

D. Enable the -is-enabledparameter for the SVM DDNS services

A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This problem involves only their older Windows XP clients and some printers and scanners.

In this scenario, which statement Is correct?

A. FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.

B. FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not support.

C. These systems use the SMQI protocol which Is an unsupported feature in FlexGroup

D. These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.

Your customer complains that u host will constantly report losing a connection to the iSCSl target and then report that the session was reestablished.

As shown in the exhibit, what is a cause of this flapping?

A. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.

B. A host with an IP address of 172.20.10.80 and a secondhost with an IP address of 10.10.20.60 are in different initiator groups.

C. A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.

D. A host with an IP address of 172.20.10.80 and a secondIP address of 10.10.20.60 is accessing different LUNs.

Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has notupgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system.

Which step would you perform to complete the firmware upgrade?

A. Reseat the NSM100 module.

B. Reseat the disk in Bay 0.

C. Power cycle the shelf.

D. Reseat the PSU of the shelf.

A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.

Referring to the Information shown in the exhibit, what Is the source of the problem?

A. Thev1db database is offline.

B. The aggregate aggr2 has a failed disk.

C. The databases On Node03 must be Switched from secondary to master.

D. The broken disk in Node03 is the source of the problem.

You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and you receive anout of apace error message on your host.

What would cause this error?

A. The maximum number of volume constituents has been reached in the ONTAP software.

B. All constituent volumes are full.

C. The inode limit is exceeded in the ONTAP software.

D. The maxdirsize Is exceeded in the ONTAP software.

Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP 9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are placed into the FlexGroup volume.

In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)

A. -v3-64bit-identifiers

B. -v4-fsid-change

C. -v3-fsid-change

D. -v4-64bit-idantifiers