HPE6-A44 Online Practice Questions and Answers

A company has a wireless network that contains a cluster of four Aruba 7030 Mobility Controllers (MC)

managed by a Mobility Master (MM) located in the data center. The company has Aps deployed that are

nearing the capacity of the cluster. The administrator wants to increase AP capacity.

How can the administrator solve the problem?

A. Add a new controller to the Mobility Master.

B. Add a Virtual Mobility Controller to the existing cluster.

C. Add a 7030 controller to the existing cluster.

D. Add a 7220 controller to the existing cluster.

An administrator needs to support Unified Communications and Collaboration (UCC) in a company's network. The network infrastructure requires the OpenFlow protocol to support SDN-capable applications. Which controller topology meets these requirements?

A. Zones

B. Standalone Mobility Controller

C. Mobility Master-Mobility Controller

D. Master_Local

Refer to the exhibit.

An administrator configures a policy for an AP Group. Port 3 of a RAP is a trunk that connects to a switch

at a branch office. VLAN 1 is untagged and VLANs 10 (for data) and 11 (for voice) are tagged. The

administrator applies an ACL inbound on Port 3 of the RAP.

How does this configuration affect traffic on Port 3?

A. It filters traffic from VLAN 10 and 11, but allows traffic from VLAN1.

B. It filters traffic form VLAN 1, but allows traffic from VLANs 10 and 11.

C. It allows all traffic form VLANs 1, 10, and 11.

D. It filters traffic from VLANs 1, 10, and 11.

A cluster has two Aruba 7240 Mobility Controllers (MCs) and two Aruba 7220 Mobility Controllers (MCs). How is the cluster leader elected if all controllers have the default priority?

A. The 7240 controller with the highest MAC address is elected.

B. The controller with the highest IP address is elected.

C. The controller with the highest MAC address is elected.

D. The 7240 controller with the lowest IP address is elected.

An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone. What must the administrator do to fix this problem?

A. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.

B. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.

C. Have the MultiZone APs initially boot from the standalone controller in the data zone.

D. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.

An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company's WLAN?

A. AirMatch

B. Clustering

C. ARM

D. Zones

An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation.

Which information will the ClearPass server return in regards to the user role assignment?

A. RADIUS VSA User-Role

B. Aruba VSA Firewall-Role

C. Aruba VSA Aruba-User-Role

D. RADIUS VSA Firewall-Role

An administrator moves an AP from Campus 1 to Campus 2. At the Campus 2, the moved AP does not connect to a controller and download an AP Group configuration.

Which process should the administrator perform to reset the AP back to its initial default state?

A. From apboot mode, execute purgeenv.

B. From the AP's ArubaOS CLI, execute write erase all.

C. From the controller's ArubaOS, execute write erase all.

D. From apboot mode, execute factory_reset.

An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.

Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

A. Standard

B. Persistent

C. Always

D. Backup

Which configuration command needs to be executed on an Aruba Mobility Controller (MC) to forward AP statistical data to an AirWave Management Platform (AMP)?

A. snmp-server

B. tunneled-node-server

C. ssh-server

D. mgmt-server