HPE0-S22 Online Practice Questions and Answers

An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution. What is a valid reason to select 10GbE?

A. The customer's network infrastructure is based on QoS service.

B. The customer needs the system to recover quickly from a failure.

C. The customer needs the object storage servers to be able to locate random data on a disk more quickly.

D. The customer plans to increase the memory in the nodes in the future.

A customer has an HPE Integrity Superdome X system with an nPartition that has been provisioned with a supported OS and application.

What first detects data corruption caused by an installed DIMM module?

A. the XNC2 controller in the internal fabric

B. the application using the data

C. the OS installed on the nPartition

D. the Superdome X firmware

An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application.

When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?

A. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes

B. when the application requires high throughput between processors and disk drives local to the same compute tray

C. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution

D. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links

An architect is planning an HPE Moonshot solution with m710p cartridges. The customer's application requires cartridge nodes to connect to a NAS. The customer's current infrastructure supports 10GbE. In the future, the customer plans to upgrade the fabric between the HPE Moonshot and the NAS solution to support 40GbE.

Which switch modules and uplink modules should the architect recommend to meet both the current and future needs?

A. HPE Moonshot 45XGc Switch Modules and HPE Moonshot 4-QSFP+ Uplink Modules

B. HPE Moonshot 180G Switch Modules and HPE Moonshot 4-QPPF+ Uplink Modules

C. HPE Moonshot 45XG Switch Modules and HPE Moonshot 16-SPF+ Uplink Modules

D. HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink Modules

An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image. and clone the

image.

The customer is concerned about cost and is not interested in managing or monitoring performance of the solution,

Which solution meets these requirements?

A. HPE Insight Cluster Management Utility (CMU)

B. HPE Intelligent Provisioning (IP)

C. HPE OneView 2.0

D. HPE Insight Control server provisioning (ICsp)

When designing a Superdome X configuration for a customer, which storage configuration should the architect choose?

A. one mezzanine FC port on one nPar dedicated for booting from an MSA 2040 and an additional FC port for user data

B. booting from a local direct attached SSD disk and a mezzanine FC port for user data storage on an MSA 2040

C. a single mezzanine FC port in each nPar for common access to all volumes on an HPE 3PAR StoreServ

D. booting from a local direct attached SSD disk and a mezzanine TOE N/W port for user data accessing an MSA 2040 using iSCSI

A customer is considering upgrading from a BL460c Gen8 to a BL460c Gen9 server. The customer needs to retain the ESXI V5.5 boot volumes and enable UEFI secure boot mode on the new BL460c Gen 9 server.

What should the architect explain to the customer?

A. The ESXI V5.5 volume will not boot in UEFI mode.

B. The server must be configured to support GPT boot drives.

C. ESXI V5.5 needs to be patched up to ESXI V6.

D. Secure boot mode must be enabled and certificate installed.

A customer needs a server quote for a DL Gen9 server. The requirements are as follows:

-Gen9 technology with internal storage to support 12 drives

-Exchange database capacity of at least 1.2TB

-512GB of LRDIMM memory

-

10Gbe Ethernet support

The architect is proposing the DL380 Gen9 server to meet this customer's current needs and some near future expansion.

Which component should the architect add to the quote to meet the customer's requirements?

A.

HPE 12Gb SAS Expander Card

B.

HPE SAS HBA Controller H244br

C.

HPE PCIe Workload Accelerators

D.

HPE Smart Storage Battery

A customer has an Ethernet-based storage solution. The customer needs to upgrade its servers to prepare for expanding storage. The customer has spent a lot of money to update its Ethernet infrastructure, so does not want to change it.

The customer has DAS and NAS-based storage and plans to implement a Fibre Channel SAN-based storage array within the next six to eight months.

Which server-based solution meets the customer's future needs?

A. HPE Apollo 8000 solutions

B. HPE DL360 solution with fibre-based HBAs

C. HPE BL460c solution with Converged Networks Adapters

D. HPE Moonshot solutions

A customer has an HPE c7000 chassis with the following components installed:

-Cisco Fabric Extender

-Fibre channel pass-through modules

-

BL460c Gen9 blades with LPe1605

The architect needs to allow network bandwidth control for some of the customer's critical servers and server-to-server communication for vMotion.

Which modification should the architect recommend?

A.

Replace the Fibre Channel pass-through modules with HPE Virtual Connect 16Gb modules

B.

Replace the Cisco Fabric Extender with HPE FlexFabrix 20/40 F8 modules

C.

Change the QoS setting on the Fibre Channel pass-through modules

D.

Change the setting within the Onboard Administrator to enable QoS