HP2-Z32 Online Practice Questions and Answers

HP MSM APs support a VSC that specifies 54 Mbps as the highest supported data rate. Several clients connect to the WLAN associated with this VSC. What is the throughput and bandwidth that the clients experience?

A. All clients connected to an AP radio share a throughput of less than 54 Mbps, but a client can transmit or receive at 54 Mbps.

B. When multiple clients connect to an AP radio, each of those clients is limited to 54 Mbps.

C. All clients connected to the VSC share a total of 54 Mbps of throughput regardless of how many AP radios support the VSC.

D. When multiple clients connect to an AP radio, each client typically receives about 50 Mbps throughput.

What are the major benefits of creating a team of controllers? (Select two.)

A. Controller redundancy

B. Flow support

C. Local DHCP support

D. PPTP client and server support

E. Single IP management of all team controllers

What is the primary difference between AES-CCMP and TKIP?

A. With AES-CCMP, each station generates its PMK as part of the 802.1X authentication process.

B. With TKIP, the station uses the same key to secure data and the MIC.

C. AES-CCMP uses a 254-bit key stream, while TKIP uses a 128-bit key stream.

D. AES-CCMP uses a stronger encryption algorithm than that provided by TKIP.

Refer to the exhibit.

A network administrator needs to configure a dynamic wireless mesh to connect HP MSM AP 1 to the network.

AP 1 will be installed outdoors where Ethernet is not available. It will connect to AP2ortoAP3; one of which will provide the primary link and one of which will act as backup. Both AP 2 and AP 3 have connections to the Ethernet network and

should not connect to each other.

What are appropriate roles for the three APs?

A. 1 = Slave; 2 = Alternate master; 3 = Alternate master

B. 1 = Slave; 2 = Master 3 = Alternate master

C. 1 = Slave; 2 = Master; 3 = Master

D. 1 = Alternate master; 2 = Alternate master; 3 = Alternate master

A company has an MSM solution that includes an MSM760 Controller and MSM APs. The VSC for the employees does not use the controller for access control. Employees' wireless clients should be assigned to VLAN 10.

How should the MSM administrator define the VLAN 10 setting?

A. As an authorized egress VLAN in the VSC

B. As an IP interface on the controller's Internet port

C. As an egress VLAN in the VSC binding for the AP group

D. As an ingress VLAN in the VSC

A network administrator wants to use a dedicated link for teaming communications between two HP MSM720 Controllers. In each MSM720's teaming settings, the administrator selects port 4 and sets the VLAN ID to 101. What is the correct setting for the port 4 network profile?

A. A network profile without a VLAN ID

B. A network profile with a VLAN ID that is not used in any another profile

C. A network profile with VLAN ID 101

D. The default network profile (Access network)

Refer to the exhibit.

A hospital requires a wireless solution for guests. To enable wireless access, the network administrator creates an access-controlled VSC that uses HTML-based user logins (Web- Auth). The exhibit shows the topology.

Which guideline should the network administrator follow to create the VSC for this solution1?

A. Do not use the default VSC because the LAN port is disconnected.

B. Use the controller for authentication but not for access control. Enable local HTML-user login,

C. Enable the DHCP server or DHCP relay on the VSC.

D. Enable wireless security filters or the Always tunnel client traffic setting. Do not enable both.

What distinguishes an HP MSM466 AP from an HP MSM460 AP?

A. The MSM466 radios support three spatial streams, while the MSM460 radios support two spatial streams.

B. All radios on an MSM466 support 802.11n, while only one radio on an MSM460 supports 802.11n and the others support 802.11 b/g.

C. An MSM466 AP requires external antennas, while an MSM460 AP uses internal antennas.

D. The MSM466 provides three radios that support 802.11n, while the MSM460 provides two radios that support 802.11n.

What is the term used for the role of an MSM controller when it is managing RADIUS server logins?

A. RADIUS authenticator

B. RADIUS supplicant

C. RADIUS proxy

D. RADIUS client

What are two factors of a radio's Effective Isotropic Radiated Power (EIRP)? (Select two.)

A. Number of stations in the cell

B. Receiver sensitivity

C. Transmit power

D. Antenna pattern

E. Cable loss