HP0-J65 Online Practice Questions and Answers

Your customer has a SAN with B-series switches and an extension using certified third party Coarse Wave Division Multiplexing (CWDM) products. Which statement is true?

A. The distance between the two data centers is in the range of more than 35 km up to 500 km.

B. CWDMFibre Channel SFPs are available as wavelength-specific 1270 to 1410 nanometer SFPs.

C. The solution uses CWDM chassis at each site that accommodate up to two active optic CWDM multiplex plug-in modules.

D. The distance between the two data centers is in the range of 10 km to 35 km.

Your customer is using a Fibre Channel MSL4048 tape library and a MSA2000fc storage system. What should they do to gain optimal tape performance?

A. Use dedicated HBA for disk and tape connections

B. Use multipath software for the tape drives

C. Use redundant paths to the tape drives

D. Avoid overlapping zones for disk and tape connections.

When merging fabrics from different vendors, which mode must be configured?

A. VSAN mode

B. Native mode

C. Interoperability mode

D. Mixed Fabric mode

In the SAN configuration, assume a goal of redundancy for everything. How many Storage Management Appliances are needed?

A. 2

B. 4

C. 6

D. 1

Which fabric design allows SAN expansion without disruption?

A. multipath design with zoning

B. single path with hot-standby switches

C. multipath design with NSPOF

D. a mix of switches from different vendors

A customer is upgrading their infrastructure and plans to migrate their SAN traffic to their Ethernet network using FCoE. Which product will allow the customer to use their HP EVA 4400 on their new infrastructure?

A. HP MPX200 Multifunction Router

B. HP E2520 switch series

C. HP SN6000 Fiber Channel Switch

D. HP CN1100E Dual Port Converged Network Adapter

You are designing a SAN solution to expand a customer's SAN fabric, which contains a large number of switches and device ports.

Which technology will allow you to increase the number of fabric ports and reduce the number of domains?

A. remote switch

B. ISL trunking

C. Access Gateway mode

D. FCIP trunking

You are designing an HP Converged Infrastructure soluition for your customer, which consists of four fully populated HP BladeSystem with HP Virtual Connect FlexFabric, two HP 3PAR StoreServ 7400 storage arrays, and four HP 8/40 SAN

switches.

The customer wants to monitoring solution for their hardware equipment.

Which HP solutions should you advise?

A. HP Insight Remote Support Advanced

B. HP Insight Online

C. HP Insight Remote Support Standard

D. HP Insight Control Environment

A customer wants to connect three separate fabrics together by using the LSAN feature. They do not want to merge the fabrics.

Which proposal this task?

A. HP 2404 FCoE Converged Network Switch

B. HP MDS 9500 Supervisor Module

C. HP 8/24 SAN Switch

D. HP 8/40 SAN Switch

Which tool is used during the demonstration of a solution that includes the HP 2408 FCoE Converged Network Switch?

A. SAN Network Advisor

B. SAN Connection Manager

C. Fabric Manager Server

D. HP Intelligent Infrastructure Analyzer