ACMP_6.3 Online Practice Questions and Answers

Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose two)

A. AAA default role for authentication method

B. Server Derivation Rule

C. Vendor Specific Attributes

D. AP Derivation Rule

E. The Global AAA profile

Which of the following firewall rules allows a user to initiate an ICMP session to other devices? (Choose two)

A. localip any svc-icmp permit

B. user any svc-icmp permit

C. user user svc-icmp permit

D. any any svc-icmp permit

E. mswitch any svc-icmp permit

Which of the following will accept named VLANs as a parameter? (Choose three)

A. Virtual AP profile

B. User derivation rule for a single VLAN

C. Server derivation rule for a single VLAN

D. Server derivation rule for a VLAN Pool

E. Access VLAN for a VLAN Pool

By default, how long will an AP scan a single channel when ARM is enabled?

A. 80 milliseconds

B. 90 milliseconds

C. 100 milliseconds

D. 110 milliseconds

E. 200 milliseconds

Which settings cannot be modified directly from a local controller?

A. Port VLAN setting

B. Switch Time Zone

C. Port trusted

D. Roles

E. SNMP Enable Trap Generation

Exhibit:

Referring to the above screen capture, on which Controller can you create a vlan?

A. Controller 10.1.11.100 only

B. Controller 10.1.11.101 and 10.254.1.3 only

C. All three Controllers

D. None of the Controllers

E. Controller 10.254.1.101 only

Exhibit: Referring to the above screen capture, on which controller can you modify APs configuration to enable ARM?

A. Controller 10.1.11.100 only

B. Controller 10.1.11.101 and 10.254.1.3 only

C. All three Controllers

D. None of the Controllers

E. On Controllers where ARM is enabled

As illustrated in the above diagram, a company has two campus locations and a building headquarters all located in different cities.

Following best practices, what would be the best way to construct mobility domains for the company?

A. Buildings (1, 2) in one domain and Buildings (3, 4, 5, 6) in one domain

B. Buildings (1, 2) in one domain, Building (3) in one domain, and Buildings (4, 5, 6) in one domain

C. Buildings (1, 2, 4, 5, 6) in one domain and Building (3) in one domain

D. Buildings (1, 2, 3, 4, 5, 6) in one domain

E. Buildings (1) in one domain building (4) in one domain

Which of the following are NOT valid RAP forwarding modes? (Choose two)

A. Tunnel

B. Bridge

C. Split-Tunnel

D. Backup

E. Standard

Which of the following describes a Remote AP provisioned in "Split-Tunnel" Forwarding mode?

A. Local user traffic first goes to the controller and is then spilt back to the local network.

B. All data and control traffic goes to the controller unsecured.

C. The user role must have a "Permit" statement in order to locally bridge the traffic.

D. The user role must have a "route src-nat" statement to locally bridge the traffic.

E. The RAP uses PAPI to send data traffic to the controller.